| |
With nowadays installations the heavy use of multiple DMX universes often exceed cable length of 200m or more with up to 30 receivers on one line. Even when using quality cables and a Line-End-Plug the signal may be affected by strong electromagnetic interference. By using a Line-Booster to refresh the DMX signal half way down, you are no longer limited to the recommended maxima.
On large scale installations it even makes sense to place a booster with multiple outputs on center stage and split the DMX line starshaped, reducing the length and load of the single lines. But keep in mind to use special, shielded DMX cable and select shortest cable run, but separate from power supply and load cables of dimmers.
The DMX booster distributes DMX signals easily and provides a high quality operation reliability by electrically isolating the input and output.
All outputs are amplified except the DMX line „thru“ where the original DMX in line will be available. The MA booster is the ideal tool for star shaped splitted DMX lines for installations in theater or TV Stations as on stages. It provides a reliabel DMX network with reduced length and load of single DMX lines.
Every single DMX line is powered by a seperate power supply and electrically isolated. Output sockets are available as XLR 5-pin or RJ 45 network connectors. The input signal is optically isolated and has a selective termination. | |
|
| |
| 130419 |
DMX Booster 1 in 8 |
|
|
| |
| 130417 |
DMX Booster 1 in 7 |
|
|
| |
| 130415 |
DMX Booster 1 in 8 |
|
|
|
| | 19“ housing with built in power connection | |
|
| |
| 483 x 44,5 x 170mm [19 x 1.8 x 6.7inch] |
|
|
|
| | |
